Roll Handling – Roll Clamps

Rolls of material are often very large and can block the forklift operator’s view, making it difficult to maneuver the forklift. Rolls are easily damaged or soiled, causing scrap loss. It is difficult for the operator to judge where the bottom of the roll is without cameras to help.

Without a solution in place:

  • Operators struggle when stacking rolls.
  • Roll bottoms get soiled and torn.
  • Operators misjudge how high the roll must be raised, resulting in damage.
  • Forward visibility is blocked when carrying a roll, leading to pedestrian accidents.
Roll clamp without solution

Using an HVS camera system:

  • The operator can view the bottom of the roll while driving via a customized camera system.
  • The operator can see pedestrians and obstacles past the rolls via a high-mounted camera.
  • Operator throughput and confidence increase.
  • Product damage and safety incidents decrease.
Roll clamp with solution

Other Applications

High/Deep Reach

HIGH/DEEP REACH

Warehouses often have narrow aisles, tall racking, and double-deep racking in order to store a higher volume of products. It is difficult for forklift operators to judge the height of their forks when picking from an upper rack level. Double-deep racking presents an additional challenge because operators must insert their forks without seeing the pallet when picking from the rear layer.

Roll Handling

ROLL HANDLING

Rolls of material are often very large and can block the forklift operator’s view, making it difficult to maneuver the forklift. Rolls are easily damaged or soiled, causing scrap loss. It is difficult for the operator to place the ends of the roll core into rack receptacles without cameras to help.

Rear View Applications

REAR VIEW

Maneuvering a forklift is difficult since it requires driving in reverse for most jobs due to the load obstructing the frontal view. Rear-end steering makes the forklift take tight turns in the front but swing wide in the back.

Let's Build Something Together

HVS welcomes the opportunity to work with original equipment manufacturers (OEM) to help integrate camera systems into their products.

Eliminating visibility issues for operators will make your equipment easier and safer to use and will remove a possible barrier to purchase. HVS is able to design camera systems to integrate with your equipment, support its application, and suit its operating environment.

We have been in business more than 25 years.
Holland Vision System is an American designer and manufacturer of camera systems for material handling and other industrial applications. We have been in business more than 25 years and have gained valuable, specialized experience with a great variety of applications.
We don't just sell you a camera system and make you figure out how to use it.
We make the effort to understand your needs. We take the time and ask questions until we are clear about what visibility issues you have. We don't just sell you a camera system and make you figure out how to use it.
We develop product and can configure camera systems as needed.
We have a broad portfolio (approaching 10,000 part numbers!) so we probably already have the right system available, but if not, we can usually create a new system design for you.
We can special design a system to fuse into your product and manufacturing process.

For manufacturers wanting to build a camera system into their product, we go to great lengths to choose or develop the right equipment for their needs. We can tailor most features of our systems and we will work with your team to ensure that the camera system will smoothly integrate into your product and manufacturing processes.

We service what we sell.
We don't make you replace an entire camera system if you damage one part. We can repair most parts if they are damaged, saving you money.
We write owner's manuals so they are complete and understandable.
We write owner's manuals so they are complete and understandable, with material handling applications in mind. You will get better instructions than you might receive from other suppliers - two or three pages of broken English written for an automotive application.
We answer the phone.
We are located in the Midwest U.S., in the Eastern time zone. Someone is normally available to answer calls for several hours after our closing time of 5:00pm.